Aluminium sliding doors and hinged doors, fitted across Delhi NCR
A door gets used forty times a day, which is why the money goes into the track and the rollers rather than the frame. We fabricate to your opening, fit it ourselves, and you slide every shutter before the balance is paid.
The doors we make
Doors carry more weight and take more abuse than windows, so we go up a section on almost everything. A shutter that is 7ft tall on a light section will drop out of square inside two years and then it never slides right again.
Sliding doors, balcony and terrace
Two, three or four panels on a bottom track. The usual job is a living room opening on to a balcony. We use tandem rollers rather than single, because a single roller under a 10mm glass shutter flattens and then the door starts to drag.
- Glass
- 8mm or 10mm toughened at full height
- Track
- Tandem rollers, stainless track insert
- Best for
- Balconies, terraces, garden openings
Hinged and casement doors
Single or double leaf on hinges, shutting against a gasket the whole way round. It seals better than a sliding, so it is the right answer where you need to keep dust and noise out, or where the opening is too narrow to slide anything.
- Lock
- Lever handle with multipoint lock on tall leaves
- Finish
- Powder coated to any RAL shade, or anodised
- Best for
- Entrances, utility rooms, narrow openings
Bathroom and utility doors
Aluminium frame with a frosted glass, acrylic or laminate panel. The reason people move away from wood here is simple: a wooden door in a Delhi bathroom swells in July and stops shutting by August. Aluminium does not care.
- Panel
- Frosted glass, acrylic sheet or laminate
- Frame
- Powder-coated section, no timber lining
- Best for
- Bathrooms, kitchens, servant rooms, dry balconies
Shop and office fronts
Glass in aluminium framing for a showroom or an office entrance, usually with a floor spring so the leaf swings both ways and closes itself. If you want no framing at all around the glass, that is our frameless toughened glass work instead.
- Closer
- Floor spring, or overhead closer on lighter leaves
- Glass
- 10mm or 12mm toughened, clear or tinted
- Best for
- Showrooms, clinics, office entrances
For the window openings in the same flat, see aluminium windows. If you want a glass entrance with no frame around the leaf, that is frameless glass doors. Office cabin fronts in glass and aluminium are on aluminium partitions.
The parts that decide whether it still slides in year five
The bottom track
Grit is what kills a sliding door in Delhi, not the frame. We fit a stainless insert in the track so the rollers run on steel rather than on soft aluminium, and we drill drain holes at the low end so water leaves instead of sitting there with the dust.
Rollers and hardware
Tandem nylon rollers on a steel body, adjustable from the shutter edge so the door can be brought back to level later without pulling the frame out. Locks and handles are quoted by name, not as "imported fittings".
Sealing at the threshold
A balcony door is where water comes in. The floor outside should fall away from the track, the outer joint gets a proper weather silicone line, and the frame sits on a bed rather than dry on the screed.
Glass and safety
Anything full height is toughened, no exceptions. At that size, plain float glass is a hospital visit waiting to happen. Frosting, tinting and reflective coats are all available and we show samples at measurement.
What it costs
₹450 to ₹750 per sq ft, fitted
Supply and fitting, before GST. A plain bathroom door with an acrylic panel sits at the bottom of that band. A three-panel sliding in 10mm toughened with a heavy system section sits at the top. Doors run a little dearer than windows per sq ft because the section and the hardware both go up.
Send sizes for a firm rate →What moves the number
GST extra. The rate we give after measurement is the rate on the bill.
Doors we have fitted
Ask for photos from your locality and we will send a set on WhatsApp.
Measurement
We check the opening, the finished floor level and what the frame will fix into. On a balcony door we also look at which way the outside floor falls, because that decides how the threshold gets sealed.
Fabrication
Cut and assembled at the workshop. Corners machined and joined so the leaf sits square, track cut to length with the stainless insert already seated, glass ordered to the measured size rather than a standard one.
Fitting
Our own team fits, levels and seals it. Then you slide every shutter, turn every lock and check the floor spring closes at the speed you want, before we take the balance.
Questions we get on every aluminium doors job
What does an aluminium sliding door cost in Delhi?
Between ₹450 and ₹750 per sq ft for supply and fitting, before GST. A two-panel balcony sliding in 8mm toughened sits around the middle of that band. Going to three panels, 10mm glass or a heavier system section pushes it towards the top.
Sliding or hinged for a balcony?
Sliding, in almost every flat. It takes no swing space and you can leave one panel open without it catching the wind. A hinged door seals better, so it wins where the opening is narrow, where dust is the main complaint, or where you want a proper lockable entrance.
Why does an old sliding door get hard to push?
Nearly always the rollers or the track. Grit builds up in the bottom channel and grinds the roller flat, or the roller was a single wheel carrying more weight than it should. We fit tandem rollers on a stainless track insert and drill drain holes so the channel clears itself.
Can aluminium doors be used in bathrooms?
Yes, and it is the reason most people call us. A wooden bathroom door swells through the monsoon and stops shutting. An aluminium frame with a frosted glass or acrylic panel does not move, and it can be washed down.
Do you fit floor springs for shop doors?
Yes. A floor spring lets the leaf swing both ways and close itself, which is what you want on a showroom or a clinic. The floor pocket has to be cut before the flooring goes down, so tell us at measurement if the floor is not finished yet.
How long does a door job take?
7 to 12 working days from confirmation for most residential work, same as windows. Shopfronts with floor springs and large toughened panels can take a little longer because the glass is made to size.
Door quote
Send the opening sizes. We will measure and price them.
Rough width and height per door is enough to start. Measurement is free anywhere in NCR and there is nothing to sign after it.