- Home
- Aluminium Fabrication Services
Aluminium fabrication work across Delhi NCR
Everything below comes out of one workshop off Dilshad Garden and goes in with our own men. That is the whole point of the list: on most sites two or three of these trades meet each other, and when one firm does all of them there is nobody to blame for the joint in between.
Every trade we do, and what it costs
Ranges are per sq ft for supply and fitting, before GST. Where you land inside a range depends on glass thickness, section weight, finish and working height, which is why we measure before quoting.
Which of these you actually need
Building or renovating a house
Windows and doors are the bulk of it, and the two decisions that matter are glass and section weight. Add glass railings for the balconies, hpl cladding or acp cladding if the elevation is being redone, and false ceilings inside. Most homeowners order in that sequence.
Fitting out an office floor
Partitions and ceiling go together, always. Framed work in aluminium partitions is the cheaper route; glass partitions costs more and gives you a lighter floor. Doors inside the run are usually frameless glass doors. On an occupied floor we work weekends at no premium.
A commercial building or elevation
Panel over the slab bands and the risers, glass over the office floors. That means acp cladding or hpl cladding meeting structural glazing, and it is exactly the junction that goes wrong when it is two separate contracts. Send drawings or a BOQ and we price it line by line.
A shop or showroom front
A fascia and signage band in acp cladding, glazing across the front, and a frameless glass doors entrance on a floor spring. Small in area, high in visibility, and the one job where a wavy panel is seen by every customer walking in.
Enquiry to handover in four steps
No advance until the measurement is done and the rate is with you in writing.
Enquiry
Call or WhatsApp. A photo of the opening with rough sizes is enough for a ballpark rate the same day.
Site measurement
Free, anywhere in NCR. We check the opening, the plaster line and the fixing surface, then send a written rate.
Fabrication
Cut and assembled at our workshop off Dilshad Garden. Most window and door jobs take 7 to 12 working days.
Installation
Fitted, sealed and cleaned by our team. You test every shutter and lock before the balance is paid.
Indicative ranges
What things cost, roughly
Working ranges for supply and fitting, before GST. Small jobs work out a little dearer per sq ft than large ones, and there is usually a minimum area. Send sizes and you get a firm figure.
Ask for a firm rate →All figures ₹ per sq ft, before GST.
Where we work
All of Delhi NCR, out of Dilshad Garden
East Delhi, Shahdara and Ghaziabad are on our doorstep, so measurement there is usually same-day. For Gurugram, Faridabad and Greater Noida we fix the visit a day ahead and carry the full sample kit.
“Prompt Response and Excellent Service at Best prices.”
“Good.”
Other verified jobs rated by customers
About working with us
What does aluminium fabrication cost in Delhi NCR?
Windows run ₹425–750 per sq ft and doors ₹450–750, both supply and fit before GST. ACP and HPL cladding sit at ₹220–350, structural glazing at ₹320–450, and partitions at ₹200–350. Railings, staircases and false ceilings are quoted on measurement because the hardware, not the area, drives the cost.
Do you take on small jobs?
Yes, though small orders work out dearer per sq ft than large ones and there is usually a minimum area. Two windows for a flat is fine. We will tell you the rate before we come out so nobody wastes a visit.
Is the site measurement really free?
Yes, anywhere in Delhi NCR, and there is nothing to sign afterwards. We measure, we send a written rate, and if you go elsewhere that is the end of it. There is no advance until the measurement is done and the figure is with you.
Do you work with architects and builders?
Regularly, and most of our cladding and glazing work comes that way. Send drawings or a BOQ and we price against it line by line. If something in the specification will not perform on that elevation, you hear it from us in writing before the order rather than as a variation halfway through.
Do you handle more than one trade on the same site?
That is the main reason to use us. Partitions and ceilings get set out from one datum. Cladding and glazing meet at a detail rather than an argument. And when something needs putting right afterwards there is one number to call.
Get a quote
Send the sizes. We will come and measure.
Measurement is free and there is nothing to sign after it. If you already have a drawing or a BOQ, send it across and we will price against it line by line.